Stress-wave propagation across material interfaces in multimaterial metallic specimens produced by laser powder bed fusion
DOI:
https://doi.org/10.21014/actaimeko.v15i4.2512Keywords:
Hopkinson bar, metallic multimaterial, stress-wave propagation, strain gaugeAbstract
The propagation of short broadband stress waves across a material interface in additively manufactured multimaterial specimens was experimentally investigated. Cylindrical CuCr1Zr--13Ni400 specimens produced by laser powder bed fusion were tested using a Forward Direct Impact Hopkinson Bar with a striker length of 5 mm. Strain gauges were positioned immediately before and after the internal material interface, allowing the wave response to be examined locally in both propagation directions. Geometrically identical single-material specimens were used as references. The experiments were performed in the elastic regime, enabling repeated impacts on the same specimens. The material interface produced measurable changes in the temporal shape of the stress pulse, with deviations from the homogeneous reference occurring at times consistent with the expected arrival of reflected wave components. The response depended on the direction of wave propagation across the interface. The FFT analysis also revealed changes in the relative frequency content, particularly at the measurement position before the interface. Similar reductions in stress and spectral amplitude were observed during propagation in both homogeneous and multimaterial specimens, demonstrating the significant influence of propagation and dispersion in the finite cylindrical geometry. The results show that the measured response results from the combined effects of interface interaction, broadband excitation, and dispersive wave propagation.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Petr Zlámal, Jan Falta, Radim Dvořák

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.
Users are free to
- share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
- adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.
At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.
Authors are
- able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).