Characterization of a liquid bath for accurate thermometer calibration and detailed uncertainty estimation
DOI:
https://doi.org/10.21014/actaimeko.v15i4.2191Keywords:
liquid bath, uniformity, stability, thermometer calibration, uncertaintyAbstract
The reliable characterization of liquid baths is essential for ensuring traceable and accurate temperature calibrations in metrology laboratories. In this study, a liquid water bath with a copper equalizing block of 12 cm length was characterized at three calibration points of 5 °C, 29.7 °C, and 80 °C. The bath performance was assessed through drift evaluation, stability, axial and radial uniformity, and loading influence using two 25 Ohm (Ω) standard platinum resistance thermometers (SPRTs). The results obtained showed excellent drift performance within ± 1 millikelvins (mK) over 12 hours at 20 °C. The instability at the three calibration points remained below 1 mK. Axial and radial uniformity values did not exceed 0.9 m 2.7 mK, respectively, and the loading effect produced temperature deviations of less than 3 mK. A detailed uncertainty analysis was carried out based on the requirements of the Guide to the expression of uncertainty in measurement (ISO GUM), considering all relevant contributions from the SPRTs and the liquid bath. The combined standard uncertainties of the bath characterization were 2.70, 3.17, and 3.87 mK at 5 °C, 29.7 °C, and 80 °C, respectively, all well below the 10 mK benchmark typically required for precision calibration baths. After the liquid bath characterization, calibration of a platinum resistance thermometer (PRT) by comparison against a 100-Ω SPRT was performed at 5 °C, 29.7 °C, and 80 °C. The associated expanded uncertainties of calibration were 0.052 °C, 0.050 °C, and 0.043 °C, respectively, including the bath characterization uncertainty. These findings confirm that the characterized liquid bath provides a stable and homogeneous thermal environment suitable for high-accuracy thermometer calibrations.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Oqab AlOtaibi , Ismail A. AlFaleh, Adel B. Shehata

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under the CC BY 4.0, Creative Commons Attribution 4.0 International License.
Users are free to
- share, i.e. copy and redistribute the material in any medium or format for any purpose, even commercially;
- adapt, i.e. remix, transform, and build upon the material for any purpose, even commercially.
At the same time, the user must give appropriate credit, provide a link to the license, and indicate if changes were made.
Additional information about the license can be found at: https://creativecommons.org/licenses/by/4.0/.
Authors are
- able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).